2890 snap download Form 2015-2024

This is the Titan series electronic safe lock from Sargent and Greenleaf. On the left is the pivot bolt model, which is fully automatic. On the right is the D Drive model, which requires turning of the keypad to manually retract the lock bolt after the code is entered. To extend the bolt, the keypad is turned back to its original position. The locks operate slightly differently, but from a programming perspective, they are identical. Your Titan lock is shipped with one code, the master code, which is used to open the lock and can also be used for certain programming functions. For instance, we can add more codes to this lock. Let's go through the process for adding a new code to one of the available user code positions (1, 2, 3, 4, 5, 6, 7, 8, or 9). We'll use position number 2 to create a new user code. The process begins by pressing 7, then star. Now we enter the master code for our lock (in this case, it's 1 2 3 4 5 6), followed by pound. Next, we'll enter the user position where we wish to create a new code. We've decided to put it in position 2, so we press 2, then pound. For simplicity's sake, we'll enter a code with all twos. So we enter the digit 2 six times, followed by pound. Now we have to enter that code again to verify, so we press pound. Now we have a new code in the lock, in addition to the master code. Our new user code is 2 2 2 2 2 2, followed by pound. The lock now operates on that code. Here's the procedure for deleting a code that already exists in the lock. Remember that the master code cannot be...